Silicon Laboratories C8051F340 Uživatelský manuál stáhnout pdf (Strana 11)

CP2201-EK

Rev. 0.1 11

PC Configuration

Configure the PC to have a static IP address. The steps below show how to configure a Windows PC to use a static

IP address.

1. Open the Network Connections Folder. This is accessible from the control panel or from the start menu by

right-clicking on My Network Places and selecting Properties.

2. Right-click on the Local Area Connection and select Properties.

3. Select Internet Protocol (TCP/IP) and click Properties. Optionally, if the Show icon in notification area when

connected is checked, right-clicking the system tray icon will provide a quick shortcut to the LAN properties

dialog and can be used as an indicator that the network is functioning properly.

Figure 18. Internet Protocol Properties Window

4. Select Use the following IP address and specify an IP address and subnet mask for the PC. For a subnet

mask of 255.255.255.0, the embedded system’s IP address must match the first three octets of the PC’s IP

address for the PC to recognize the embedded system. See Section for additional information about

choosing the embedded system’s IP address.

Note: When entering an IP or subnet address into the dialog box, the cursor will automatically advance to

the next field for a three digit octet. If entering a one or two digit octet, the spacebar, right arrow key, or ‘.’

can be pressed to advance to the next field.

Figure 19. IP Address and Subnet Mask Window

5. Click OK after the static IP address and subnet mask have been configured. The PC will now be able to

access the embedded system using a crossover cable.

1 2 ... 6 7 8 9 10 11 12 13 14

Žádné komentáře

Silicon Laboratories C8051F340 Uživatelský manuál Strana 11